Building Enclosures and Materials: Publications

Shukla, N., Watts, A., Honeker, C., Hill, M., Kosny, J. (2018).
Thermal impact of adhesive-mounted rooftop PV on underlying roof shingles. In: Solar Energy. 174: Elsevier Ltd., pp. 957-966.
Adhesive mounting of residential rooftop photovoltaics (PV) is an alternative to traditional rack mounting that reduces...
Fontanini, A., Abreu, J. (2018).
A Data-Driven BIRCH Clustering Method for Extracting Typical Load Profiles for Big Data. In: IEEE Power & Energy General Meeting. Portland: IEEE PES.
In typical load shape analysis, many different clustering methods have been used to segment customers, interpret...
Czlonka, S., Bertino, M.F., Kosny, J., Strakowska, A., Maslowski, M., Strzelec, K. (2018).
Linseed oil as a natural modifier of rigid polyurethane foams. In: Industrial Crops and Products. 115: Elsevier B.V., pp. 40-51.
Fontanini, A.D., Castro Aguilar, J.L., Mitchell, M.S., Kosny, J., Merket, N., DeGraw, J.W., et al. (2018).
Lazrak, A., Fourmigué, J., Robin, J. (2018).
Alexiades, V., Kosny, J. (2017).
Chapter 3, Heat and Mass Transfer, Section 3.4.3: Phase Change Materials, Melting and Freezing. In: CRC Handbook of Thermal Engineering. 2nd ED New York: CRC Press, Taylor & Francis Group, pp. 393 - 416.
Kosny, J., Yarbrough, D. (2017).
Chapter 4, Applications, Section 4.9 Use of Phase Change Materials in Buildings. In: CRC Handbook of Thermal Engineering. 2nd ED New York: CRC Press, Taylor & Francis Group, pp. 781-799.
Kosny, J., Yarbrough, D. (2017).
Chapter 4, Applications, Section 4.10 Thermal Bridges in Building Structures. In: CRC Handbook of Thermal Engineering. 2nd ED New York: CRC Press, Taylor & Francis Group, pp. 800-817.
Kosny, J., Fontanini, A., Shukla, N., Fallahi, A., Watts, A., Trifu, R., et al. (2017).
This paper is focused on a new, easy to install, extremely light weight, and high R-value radiant barrier that shows...
Shukla, N., Watts, A., Honeker, C., Kośny, J. (2017).
Hydrothermal Impact of Adhesive-Applied Rooftop Photovoltaic System. In: Advances in Hygrothermal Performance of Building Envelopes STP 1599. West Conshohocken: ASTM International, Selected Technical Papers, PP. 69-82.
Sharma, H., Fontanini, A.D., Vaidya, U., Ganapathysubramanian, B. (2017).
Transfer operator based approach for optimal sensor placement under uncertain operating conditions. In: Proceedings of the 15th International IBPSA Conference (Building Simulation). San Francisco.
Fontanini, A.D., Vaidya, U., Passalacqua, A., Ganapathysubramanian, B. (2017).
White, L.S., Echard, D.R., Bertino, M.F., Gao, X., Donthula, S., Leventis, N., et al. (2017).
Fabrication of Native Silica, Cross-Linked, and Hybrid Aerogel Monoliths with Customized Geometries. In: Translational Materials Research. 3(1), 15002.
Shukla, N., Watts, A., Kosny, J. (2016).
Field Demonstration of Superior Performance of Advanced Building Technologies. In: Thermal Performance of the Exterior Envelopes of Whole Buildings XIII International Conference. Clearwater: ASHRAE.
Shukla, N. (2016).
Differential Scanning Calorimeter and PCM Enthalpy Characterization. In: Thermal Performance of the Exterior Envelopes of Whole Buildings XIII International Conference. Clearwater Beach: ASHRAE.
Shukla, N. (2016).
New ASTM C1784 Test Standard. In: Thermal Performance of the Exterior Envelopes of Whole Buildings XIII International Conference. Clearwater Beach: ASHRAE.
Shukla, N., Watts, A., Honeker, C., Kosny, J. (2016).
Hygrothermal Impact of Adhesive-applied Rooftop PV. ASTM C16 Special Technical Paper (STP) 1599. In: Symposium on Advances in Hygrothermal Performance of Building Envelopes: Materials, Systems and Simulations. Orlando: ASTM.
Honeker, C., Singh, R., Watts, A., Shukla, N., Fallahi, A. (2016).
Residential Solar Systems as an Appliance - Plug and Play PV. In: Technical Proceedings of the TechConnect World Innovation Conference & Expo. 2.
Chapter 9: Materials for Green Building.
Fontanini, A.D., Kosny, J., Shukla, N., Fallahi, A., Ganapathysubramanian, B. (2016).
Development and verification of the Fraunhofer Attic Thermal Model (FATM). . In: Building Performance Simulation. 10(1), pp. 72-90.
DOI: 10.1080/19401493.2015.1134669.
Fontanini, A.D., Pr'Out, K.M., Ganapathysubramanian, B., Kosny, J. (2016).
Fontanini, A.D., Vaidya, U., Passalacqua, A., Ganapathysubramanian, B. (2016).
Quantifying mechanical ventilation performance: the connection between transport equations and Markov matrices. In: Building and Environment. 104, pp. 253-262.
Fontanini, A.D., Vaidya, U., Ganapathysubramanian, B. (2016).
A methodology for optimal placement of sensors in enclosed environments: A dynamical systems approach. In: Building and Environment. 100, pp. 145-161.
Urban, B., Shukla, N., Fontanini, A., Kosny, J. (2015).
Measuring Field Performance of Aerogel Insulation in a Hot, Dry Climate. In: BEST4 Conference on Building Enclosure Science and Technology. Kansas City: National Institute of Building Sciences, pp. 1-10.
Biswas, K., Shukla, N., Kosny, J., Abhari, R. (2015).
Low-Cost Bio-Based Phase Change Materials as an Energy Storage Medium in Building Envelopes. In: BEST4 Conference on Building Enclosure Science and Technology. Kansas City: National Institute of Building Sciences, pp. 1-12.
Fallahi, A., Shukla, N., Fontanini, A., Carbary, L., Serino, R., Kosny, J. (2015).
Field Performance Study of EIFS System Using Vacuum Insulation Panels. In: BEST4 Conference on Building Enclosure Science and Technology. Kansas City, pp. 1-26.
Narain, J., Jin, W., Ghandehari, M., Wilke, E., Shukla, N., Berardi, U., et al. (2015).
Shukla, N., Kosny, J. (2015).
DHFMA Method for Dynamic Thermal Property Measurement of PCM-integrated Building Materials. In: Current Sustainable Renewable Energy Report - Built Environment. 2(2), pp. 41-46.
Castro Aguilar, J.L., Gentle, A.R., Smith, G.B., Chen, D. (2015).
A Method to Measure Total Atmospheric Long-Wave Down-Welling Radiation Using a Low Cost Infrared Thermometer Tilted to the Vertical. In: Energy. 81: Elsevier, pp. 233-244.
Fontanini, A., Vaidya, U., Ganapathysubramanian, B. (2015).
Constructing Markov Matrices for Real-Time Transient Contaminant Transport Analysis for Indoor Environments. In: Building and Environment. 94(1), pp. 68-81.
Urban, B., Shukla, N., Fontanini, A., Kosny, J. (2014).
An Outdoor Hut Testing Platform for Evaluating Advanced Building Enclosures. In: NSB Lund: NSB, pp. 135-143.
Shukla, N., Fallahi, A., Kosny, J. (2014).
Aerogel Thermal Insulation - Technology Review and Cost Study for Building Enclosure Applications. In: American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) Transactions 2014 120(1), New York: ASHRAE, pp. 294-307.
Kosny, J., Misiopecki, C., Fallahi, A., Shukla, N., DuPont, W., Carbary, L. (2014).
Thermal Design of Window-Wall Interface in Wall Energy Retrofits Using High-Performance Vacuum Insulation. In: American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) Transactions 2014 120(1), New York: ASHRAE, pp. 90-106.
Kosny, J., Fallahi, A., Shukla, N., Kossecka, E., Abhari, R. (2014).
Thermal Load Mitigation and Passive Cooling in Residential Attics Containing PCM-Enhanced Insulations. In: Solar Energy. 108, pp. 164-177.
Fontanini, A., Passalacqua, A., Vaidya, U., Olsen, M.G., Ganapathysubramanian, B. (2014).
High-Resolution Performance Analysis of a Large Building with Linear Dispersion Ductwork System. In: ASHRAE Conference Proceedings. 120(1): ASHRAE, pp. 1-10.
Kosny, J., Asiz, A., Smith, I., Shrestha, S., Fallahi, A. (2014).
A Review of High R-value Wood Framed and Composite Wood Wall Technologies Using Advanced Insulation Techniques. In: Energy and Buildings. 72, pp. 441-456.
Shukla, N., Fallahi, A., Kosny, J. (2013).
VIP - Technology Review and Cost Study for Building Retrofits in Northern US Locations. In: Thermal Performance of the Exterior Envelopes of Whole Buildings XII International Conference. Clearwater Beach: ASHRAE, pp. 1-9.
Shukla, N., Kumar, D., Elliot, D., Kosny, J. (2014).
Moisture Content Measurements in Wood and Wood-based Materials - Advancements in Sensor Calibration and Low Moisture Content Regime. In: Next Generation Thermal Insulation Challenges and Opportunities. Selected Technical Papers STP1574. Jacksonville: ASTM, pp. 66-80.
Shukla, N., Cao, P., Kosny, J. (2014).
Lab-scale Dynamic Thermal Testing of PCM-enhanced Building Materials. In: Next Generation Thermal Insulation Challenges and Opportunities. Selected Technical Papers STP1574. Jacksonville: ASTM, pp. 142-154.
Urban, B., Elliott, D., Shukla, N., Fallahi, A., Kosny, J., McDonough, M. (2013).
Thermal Mass Effect of Solid Block Aerated Autoclaved Concrete. In: 2nd Central European Symposium on Building Physics. Vienna: CESBP, pp. 1-37.
Shukla, N., Elliott, D., Kumar, D., Misiopecki, C., Kosny, J. (2013).
Experimental Hygrothermal Study in Wood and Wood-based Materials. In: CESBP 2013, 2nd Central European Symposium on Building Physics. Vienna: CESBP, pp. 261-268.
Kosny, J., Kossecka, E. (2013).
Understanding a Potential for Application of Phase-Change Materials (PCMs) in Building Envelopes. In: ASHRAE 2013 Winter Conference. Dallas: ASHRAE Transactions, pp. 3-13.
Kosny, J., Fallahi, A., Shukla, N. (2013).
Fallahi, A., Durschlag, H., Elliot, D., Hartsough, J., Shukla, N., Kosny, J. (2013).
Fontanini, A., Vaidya, U., Ganapathysubramanian, B. (2013).
A Stochastic Approach to Modeling the Dynamics of Natural Ventilation Systems. In: Energy and Buildings. 63, pp. 87-97.
Kosny, J., Fallahi, A., Shukla, N. (2013).
Experimental and Numerical Energy Performance Analysis of PCM-enhanced Building Envelope Products and Systems. In: CESBP 2013, 2nd Central European Symposium on Building Physics. Vienna: CESBP, pp. 1-34.
Kosny, J., Fallahi, A., Shukla, N. (2013).
Cost Analysis of Simple Phase Change Material-Enhanced Building Envelopes in Southern U.S. Climates. In: U.S. Department of Energy EERE Building Technologies Program Technical Report. Golden: DOE BTO, pp. 1-74.
Misiopecki, C., Kosny, J., Fallahi, A., DuPont, W. (2013).
Optimization of Window Installations in Deep Energy Retrofits Using Vacuum Insulation Panels. In: CESBP 2013, 2nd Central European Symposium on Building Physics. Vienna: CESBP, pp. 1-16.
Fallahi, A., Shukla, N., Kosny, J. (2012).
Numerical Thermal Performance Analysis of PCMs Integrated with Residential Attics. In: SimBuild Conference IBPSA-USA. Madison: IBPSA, pp. 431-439.
Shukla, N., Fallahi, A., Kosny, J. (2012).
Performance Characterization of PCM Impregnated Gypsum Board for Building Applications. In: International Conference on Solar Heating and Cooling for Buildings and Industry. San Francisco: Energy Procedia, pp. 370-379.
Shukla, N., Fallahi, A., Kosny, J., Harasim, S., Blair, C. (2012).
Aerogel for Thermal Insulation of Interior Wall Retrofits in Cold Climates. In: BEST3 Conference on Building Enclosure Science and Technology. Atlanta: National Institute of Building Sciences, pp. 1-12.
Kossecka, E., Kosny, J., Yarbrough, D. (2012).
Energy Performance Analysis of Building Envelopes Utilizing Blown Fiber Insulation with Microencapsulated Phase Change Material (PCM). In: BEST3 Conference on Building Enclosure Science and Technology. Atlanta: National Institute of Building Sciences.
Kosny, J. (2012).
Highlights of U.S. Building Envelop Research During the Last Decade. In: BEST3 Conference on Building Enclosure Science and Technology. Atlanta: National Institute of Building Sciences.
Kosny, J., Biswas, K., Miller, W., Kriner, S. (2012).
Smith, G.B., Castro, J.L.C., Gentle, A.R., Chen, D. (2012).
Multi-Parameter Sensitivity Analysis: A Design Methodology Applied to Energy Efficiency in Temperate Climate Houses. In: Energy and Buildings. 55, pp. 668-673.
Kosny, J., Kossecka, E., Brzezinski, A., Tleoubaev, A., Yarbrough, D. (2012).
Fontanini, A., Olsen, M.G., Ganapathysubramanian, B. (2011).
Green Building Duct Systems: Thermal comparison between ceiling diffusers and fabric ductwork products. In: Energy and Buildings. 43(11), pp. 2973-2987.
Gentle, A.R., Aguilar, J.L.C., Smith, G.B. (2011).
Optimized cool roofs: Integrating albedo and thermal emittance with R-value. In: Solar Energy Materials and Solar Cells. 95(12), pp. 3207-3215.
Engelmann, P., Urban, B., Kosny, J. (2011).
New Developments in Mitigation of Thermal Bridges Generated by Light Gauge Steel Framing Components. In: NSB 2011, 9th Nordic Symposium on Building Physics. Tampere: NBS, pp. 1-8.
Urban, B., Engelmann, P., Urban, B., Engelmann, P., Kossecka, E., Kosny, J. (2011).
Arranging Insulation for Better Thermal Resistance in Concrete and Masonry Wall Systems. In: NSB 2011, 9th Nordic Symposium on Building Physics. Tampere: NBS, pp. 1-8.
Urban, B. (2010).
Kosny, J., Brown, D., Kriner, S., Horvath, P., Yuan, S., Biswas, K., et al. (2010).
Engelmann, P. (2010).
Kosny, J. (2010).
Ferrara, C., Kuhn, T., Wilson, H., Schindler, R. (2010).
Shukla, N., Saigal, A. (2010).
Modal Analysis of a Nanomechanical Antenna Structure in MHz-GHz range. In: International Journal of Modelling and Simulation. 30(1), pp. 22-29.
Urban, B., Roth, K. (2010).
Guidelines for Selecting Cool Roofs. Boston: Fraunhofer Center for Sustainable Energy Systems CSE, pp. 1-23.
Shukla, N., Huxtable, S. (2010).
Fullerene Suspension. In: K. Sattler, ed., Handbook of Nanophysics. 1st Edition Boca Raton: CRC Press/Taylor & Francis, pp. 40-1 and ff..

Search

-OR-

Search Expertise

-OR-

Search by Date